Flash

Q:Is it possible to overpower the sun using two tt600 in one bracket and small softbox plus ND filter? Can they provide sufficient power?

Yes, that could be enough power.

Q:How to keep Godox lights from turning OFF or more like "going to sleep" during a studio shoot?

Make sure that in the menu section for both lights that you have ‘standby’ and ‘sleep’ set to ‘OFF’. 


Q:How to do a full factory reset on the Godox TT350s?

To turn wireless mode off press and hold the sync button until the wireless symbol flashes, rotate the dial until the CH number disappears leaving only the wireless symbol flashing, then press set.


Q:Could I use the Dome diffuser with the Godox S-R1 adapter on the V860II. Does this combination work fairly well?

Yes, this adapter will allow you to connect the magnetic dome diffuser to your V860II. The Godox AK-R1 kit has extra options that work great too.


Q:What is the function of Godox X2T's sync cord jack plug connection?

Allows you to fire older models of lights since some cameras don’t have a sync cord.

Q:Is there any real world difference between the V1 and V860iii for a total novice at flash photography?

The main benefit of the V1 is not just the round head itself but all the accessories that the round head is compatible with. The AK-R1 kit includes a grid, snoot, gel holder, color corrections gels, dome, and bounce card. They all attach easily to the V1. 


Q:“I've read that Canon t7 not have the central metallic pin in the hot shoe and this is necessary for data communication to the speedlite. If i buy a Godox XPro-C can this problem be solved?

Yes. The XPro-C had a firmware update (v1.8) to make it compatible with the T7 and T100.

Q:What are the top three softboxes recommend for someone shooting with an AD400Pro?

The Godox AD-S60S, AD-S65S, and AD-S85S. Those connect directly to the AD400 and are very portable.

Q: How to check the version of TT685?

Firmware Version Checking:
Please switch the flash on, then press the “Zm/C.Fn” button for 2
seconds and enter C.Fn custom functions. The firmware update version (e.g. Ver X.X) will be
displayed on the LCD panel.

Q: How to check the version of V860II?

Firmware Version Checking:
Please switch the flash on, then press the “Zm/C.Fn” button for 2
seconds and enter C.Fn custom functions. The firmware update version (e.g. Ver X.X) will be
displayed on the LCD panel.

Q: How to check the version of AD360II?

Firmware Version Checking:
Please switch the flash on, then press the “MENU” button and enter C.Fn custom functions. The firmware update version (e.g. Ver X.X) will be displayed on the LCD panel.

Q: How to check the version of AD600/AD600B?

Firmware Version Checking:
Please switch the flash on, then press the “MENU” button and enter C.Fn custom functions. The firmware update version (e.g. Ver X.X) will be displayed on the LCD panel.

Q: Can I repair my Godox flash on my own?

Trying to repair or open up/disassemble your Godox flash could be dangerous to your own life! You should always contact your local dealer or service point for a service or repairs.


Q: How to reset the defaults setting of my Godox flash AD600Pro?

Please hit the “MENU” button and enter C.Fn custom functions, select RESET to reset the defaults setting.

Q: How to reduce light power?

There are several options to reduce light power in order to obtain a narrow depth of field.
Set your camera to a lower ISO. Setting 50 ISO or even less if required.
Use grey filters for your lenses to reduce light.
Softboxes may reduce the light output.
Use HSS with Godox Transmitters.

Q: I don’t see my camera as HSS / TTL compatible.

If your camera is not listed as compatible, it simply means that it has not yet been tested with all possible features.
Don’t worry, you can test it, it will not have any negative effect on the camera.

12