X1R-S Firmware V05
Release Date
2018/01/10
Remark
Before updating this firmware version, please make sure that your gear has download the G1 firmware launcher installer.
Updated Contents

1.The customer can set RF ID. Operation: press the CH and GR button simultaneously and power it on to enter the RF ID setting interface. Short or long press the CH button to add the ID value while short or long press the GR button to decrease. Power off the flash trigger after 5s, and ID value can be set and saved. Then, power it on, and the ID value will affect RF reception.



X1T-F Firmware V0.7
Release Date
2020/11/09
Remark
Before updating this firmware version, please make sure that your gear has download the G2 firmware launcher installer.
Updated Contents

1.To optimize the communication of the same cameras.


X1T-O Firmware V06
Release Date
2019/10/22
Remark
Before updating this firmware version, please make sure that your gear has download the G2 firmware launcher installer.
Updated Contents

1.To solve the discontinuous triggering problem in continuous shooting when using Panasonic cameras e.g.S1R.


X2T-C Firmware V1.4
Release Date
2022/06/30
Remark
Before updating this firmware version, please make sure that your gear has download the G3 firmware launcher installer.
Updated Contents

1. To match the update of Godox flash APP.

X2T-C Firmware(Z01 Version) V1.4
Release Date
2022/06/30
Remark
Before updating this firmware version, please make sure that your gear has download the G3 firmware launcher installer.
Updated Contents

1. To match the update of Godox flash APP.

This version is compatible with X2T-C Trigger, which has a Z01 marking on the outer casing ( near the USB port or on the battery cover) or has a sticker marking Z01 near the USB port.